top of page

Liquid Repellent Application


The instructions for applying the Liquid Repellent💧Pime Shop are very simple, you just have to follow these steps:

  1. First make sure that the cap you are applying it to is made of cotton, polyester, or even nubuck. If the fabric is synthetic (vinyl, nylon or spandex) the effect will not be visible.

  2. Then you must make sure that the cap is clean, dry and free of dust.

  3. Apply the liquid repellent on the cap, pressing the atomizer 5 cm away, in such a way that the entire surface is completely covered.

  4. Wait 15-20 minutes to reapply the repellent in the same way.

  5. For best results it is recommended to apply a third coat.

  6. Nanoparticles need a curing time, so the effect will be seen after 24 hours and will improve in a maximum of 72 hours.

  7. During the curing time it is advisable to leave the coated surface in a ventilated area to optimize the effect.

  8. Avoid at all times scrubbing the surface on which you applied the repellent.

IMPORTANT


Caps coated with liquid repellent are washable; Its effect can last up to 3 washes if you use mild soap and cold water.


The repellent effect lasts for 3 months with constant use, but can last up to more than 6 months.


In the case of application on shirts and clothing in general, it lasts from 2 to 4 washes.


One 60 milliliter bottle of Pime Shop Liquid Repellent makes up to 12 applications in Trucker hat style caps. That is, with a 60 ml bottle you can coat a Mexican Lottery cap with 3 layers of nanoparticles up to 3 times.

2 views0 comments

Recent Posts

See All

Comments


bottom of page